EN
| Product Features | |
 | High capacity, high precision |
Equipped with 4 nozzle heads, capacity up to 3600-5400 Pcs/H (Tape to Tray) | |
| Brand-new four-nozzle system with precise structure | |
| each nozzle operates independently, camera flying capture | |
| the system intelligently selects the nozzle pick-and-place mode | |
| Diversified Packaging Conversion System | Supports Tray to Tape mode |
| Supports Tape to Tray mode | |
| Supports Tube to Tape mode | |
| Professional Vision System | Top CCD (1.3 megapixels) for position calibration of each component |
Bottom CCD (1.3 megapixels) for IC positioning with flying capture function With high-precision top/bottom CCD positioning system, positioning accuracy ±0.02mm, meeting precise pick-and-place of extremely small products | |
| Smart System Interaction | Supports pick-up/tape AOI inspection, can scan IC laser label information, provides full-process inspection for products, and production information can interact intelligently with MES in real time |
| PGMES | Standard MES interface (order quantity, NG/OK count, running status), displayed on CPS platform |
| One-key Setup | Built-in standard template data (one-key parameter setting) |
| Abnormal Assistance | Indicates abnormal causes and solutions when alarm occurs |
| Equipment Status Monitoring | Monitors equipment running status and responds (early warning for high rejection rate, parameter adjustment, etc.) |
| Maintenance | Remote service and adjustment; maintenance reminders, consumable replacement reminders |
| Consumable Management | The equipment dynamically records nozzle movement counts, screw travel distance and other information |
| Product Specifications | ||
| Pick-and-Place System | Pick-and-Place Accuracy | ±0.03mm |
| Pick-and-Place Device | Vacuum nozzle x 4 | |
| UPH | 3600-5400 PCS/H | |
| Control System | Drive System | X/Y-axis: imported servo drive system |
| Z/U-axis: stepping drive system | ||
| Transmission Architecture | X-axis: ball screw + linear guide | |
| Y-axis: ball screw + linear guide | ||
| Z-axis: timing belt + linear guide | ||
| Resolution | X-axis: ±0.02mm | |
| Y-axis: ±0.02mm | ||
| Z-axis: ±0.05mm | ||
| U-axis: 0.1125° | ||
| Pressing Block | Motor-driven pressing block | |
| Loading/Unloading System | Tape Feeding | Single/dual feeder |
| Tape Unloading | Automatic taping machine (carrier tape width 12-56mm, supporting both self-adhesive and heat-seal packaging) | |
| Tray Feeding | Automatic tray loader/unloader | |
| Tray Unloading | Automatic tray loader/unloader | |
| Tube Feeding | Manual tube feeder | |
| Vision System | Top/bottom CCD | 1280*960 pixels |
| Resolution | 0.024mm | |
| Field of View | 19.2mm*15.36mm | |
| Positioning Accuracy | ±0.02mm | |
| Processing Speed | <0.1 s/unit | |
Marking System | Tape/tray marking | Ink dotting (standard), inkjet marking, laser marking, label feeder labeling |
| Voltage | Single-phase 220V, 50/60Hz | |
| Power | 2.5KW | |
| Air Pressure | 0.6 mPa | |
| Operating System | Operating System | Win10 x64 |
Operating System Intelligent System | Monitor | 19" LCD |
| Input Device | Keyboard and mouse | |
| PGMES | Standard MES interface (order quantity, NG/OK count, running status) | |
| One-key Setup | Built-in standard template data (one-key parameter setting) | |
| Abnormal Assistance | Indicates abnormal causes and solutions when alarm occurs | |
| Equipment Status Monitoring | Monitors equipment running status and responds (early warning for high rejection rate, parameter adjustment, etc.) | |
Intelligent System Equipment Appearance | Maintenance | Remote service and adjustment; maintenance reminders, consumable replacement reminders |
| Status Monitoring | Displayed on CPS platform | |
| Main Unit Dimensions | L1450mm*W800mm*H1360mm (excluding alarm light height) | |
| Machine Weight | 570KG | |
